Metallic effect water transfer decal

1.Prepare the water,scissor (for the full coating decal) ,squeegee, and the product (glass bottle) and decal.

2. Full coating decal, cut the decal seperated, then put into water, for independent decal, put whole sheet into water, soak for 30-60 seconds.

3.Take out the paper once the film able to release and move or take off the film without paper.

4. Place the soaked paper (or only the film) on the standard position of the substrate and remove the bottom paper.

5. Use the squeegee scrape bubbles and moisture,until water discharge.

6. Until decal dry (4 hours), remove(peel off) the transparent film on the surface. Then baking or Spraying according to the material.